CLUTCH RELEASE CYLINDER INSTALLATION

PROCEDURE


  1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY

    A01X7BL

    1. Install the clutch release cylinder with the 3 bolts.

      Torque:
      12 N*m  { 120 kgf*cm, 9 ft.*lbf }

  2. INSTALL CLUTCH RELEASE CYLINDER TO ACCUMULATOR TUBE

    A01X4EX

    1. Using a union nut wrench, connect the tube to the clutch accumulator and release cylinder.

      Torque:
      16 N*m  { 158 kgf*cm, 11 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

    2. Install the tube with the 2 bolts.

      Torque:
      12 N*m  { 120 kgf*cm, 9 ft.*lbf }

  3. INSTALL NO. 1 CLUTCH HOUSING COVER

    B001ZYP

    1. Install the housing cover with the 3 bolts.

      Torque:
      12 N*m  { 120 kgf*cm, 9 ft.*lbf }

  4. FILL RESERVOIR WITH BRAKE FLUID

    Click here

  5. BLEED CLUTCH LINE

    Click here

  6. CHECK FLUID LEVEL IN RESERVOIR

    Click here

  7. INSPECT FOR CLUTCH FLUID LEAK