CLUTCH MASTER CYLINDER(for LHD) REMOVAL

PROCEDURE

1. DRAIN CLUTCH FLUID

2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

   Click here

3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

   Click here

4. REMOVE INSTRUMENT SIDE PANEL LH

   Click here

5. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

   Click here

6. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

   Click here

7. REMOVE FRONT DOOR SCUFF PLATE LH

   Click here

8. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

   Click here

9. REMOVE COWL SIDE TRIM BOARD LH

   Click here

10. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

11. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

12. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)

    Click here

13. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)

    Click here

14. REMOVE MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)

    Click here

15. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE AND CLUTCH RESERVOIR TUBE

    Click here

16. REMOVE CLUTCH PEDAL SUPPORT ASSEMBLY WITH CLUTCH MASTER CYLINDER

    Click here

17. REMOVE CLUTCH RESERVOIR HOSE

    

    
    

    1. Using pliers, grip the claws of the clip, slide the 2 clips and remove the clutch reservoir hose.

       Tech Tips

       Use a container to catch the fluid.

18. REMOVE CLUTCH MASTER CYLINDER TO WAY TUBE

    

    
    

    1. Using a union nut wrench, remove the tube.

       Tech Tips

       Use a container to catch the fluid.

19. REMOVE CLUTCH START SWITCH ASSEMBLY

    
    

    1. 

       Remove the 2 nuts and clutch start switch.

20. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

    
    

    1. 

       Remove the clip, wave washer and clevis pin.

    2. 

       Remove the 2 bolts and clutch master cylinder.