PARK / NEUTRAL POSITION SWITCH ADJUSTMENT

PROCEDURE


  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01X132

      Loosen the 2 bolts of the park/neutral position switch assembly and move the shift lever to N.

    2. A01X86TE01
      Text in Illustration
      *a Neutral Basic Line
      *b Groove

      Align the groove with the neutral basic line.

    3. Hold the switch in the position described above and tighten the 2 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    4. After the adjustment, perform the on-vehicle inspection Click here.