PARK / NEUTRAL POSITION SWITCH INSPECTION

PROCEDURE


  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. B001XBKE98
      Text in Illustration
      *a

      Component without harness connected

      (Park/Neutral Position Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      6 (IG) - 4 (C) Shift lever in D and S Below 1 Ω
      6 (IG) - 5 (A) Shift lever in P and R Below 1 Ω
      6 (IG) - 7 (PA) Shift lever in P and N Below 1 Ω
      6 (IG) - 9 (B) Shift lever in R, N, D and S Below 1 Ω
      1 (RB) - 2 (RL) Shift lever in R Below 1 Ω
      3 (B) - 4 (C) Shift lever in P and N Below 1 Ω
      6 (IG) - 4 (C) Shift lever not in D and S 10 kΩ or higher
      6 (IG) - 5 (A) Shift lever not in P and R 10 kΩ or higher
      6 (IG) - 7 (PA) Shift lever not in P and N 10 kΩ or higher
      6 (IG) - 9 (B) Shift lever not in R, N, D and S 10 kΩ or higher
      1 (RB) - 2 (RL) Shift lever not in R 10 kΩ or higher
      3 (B) - 4 (C) Shift lever not in P and N 10 kΩ or higher

      If the result is not as specified, replace the park/neutral position switch assembly.