ATF TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL TEMPERATURE SENSOR


    1. Coat the O-ring of the temperature sensor with ATF.

    2. A01XBAG

      Using a 19 mm deep socket wrench, install the temperature sensor.

      Torque:
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note


      • When reusing the temperature sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the temperature sensor.

    3. Connect the temperature sensor connector.

  2. ADD AUTOMATIC TRANSMISSION FLUID

    Click here