SPEED SENSOR(for Output Revolution Sensor) INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION REVOLUTION SENSOR (SP2)

   
   

   1. Install the transmission revolution sensor (SP2) to the automatic transmission case sub-assembly with the bolt.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Connect the connector to the transmission revolution sensor (SP2).

   3. Install the wire harness clamp with the bolt.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

   Click here