OIL PUMP DISASSEMBLY

PROCEDURE


  1. REMOVE FRONT OIL PUMP BODY O-RING


    1. B001XUJ

      Remove the front oil pump body O-ring from the oil pump assembly.

  2. SECURE OIL PUMP ASSEMBLY


    1. B001XT8

      Place the oil pump assembly on the torque converter assembly.

  3. REMOVE CLUTCH DRUM OIL SEAL RING


    1. B001WGV

      Remove the 2 clutch drum oil seal rings from the oil pump assembly.

  4. INSPECT FRONT OIL PUMP DRIVE GEAR ROTATION

    Click here

  5. REMOVE FRONT OIL PUMP PLATE


    1. B001YGQ

      Using a T30 "TORX" socket wrench, remove the 3 screws and front oil pump plate from the oil pump assembly.

  6. REMOVE STATOR SHAFT ASSEMBLY


    1. B001W65

      Using a T30 "TORX" socket wrench, remove the 7 screws and stator shaft assembly from the front oil pump body sub-assembly.

  7. INSPECT STATOR SHAFT ASSEMBLY

    Click here

  8. INSPECT CLEARANCE OF OIL PUMP ASSEMBLY

    Click here

  9. REMOVE FRONT OIL PUMP DRIVE GEAR


    1. B001X2B

      Remove the front oil pump drive gear from the front oil pump body sub-assembly.

  10. REMOVE FRONT OIL PUMP DRIVEN GEAR


    1. B001XMM

      Remove the front oil pump driven gear from the front oil pump body sub-assembly.

  11. REMOVE FRONT OIL PUMP OIL SEAL


    1. B001W08E02
      Text in Illustration
      *a Protective Tape

      Using a screwdriver, remove the front oil pump oil seal from the front oil pump body sub-assembly.

      Note

      Do not damage the bushing or front oil pump body sub-assembly.

      Tech Tips

      Tape the screwdriver tip before use.

  12. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY

    Click here