SHIFT LEVER REASSEMBLY

PROCEDURE


  1. INSTALL POSITION INDICATOR LENS

    Tech Tips

    Only perform this procedure when replacement of the position indicator lens is necessary.

    B001XAH

    1. Attach the 4 claws to install the position indicator lens to the position indicator housing assembly.

    2. B001ZLI

      Attach the 2 claws install the position indicator plate sub-assembly to the position indicator lens.

    3. B001ZU4

      Attach the claw and install the No. 2 position indicator slide cover to the position indicator slide cover.

    4. B001YGKE01
      Text in Illustration
      *a "FRONT" Mark

      Install the position indicator slide cover together with the No. 2 position indicator slide cover.

      Tech Tips

      Install the position indicator slide cover so that its mark faces the vehicle front.

    5. B001YUK

      Attach the 2 claws to install the shift lock release spring and shift lock release button to the position indicator housing assembly.

    6. Install the position indicator housing assembly.

      Click here

  2. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY


    1. B001ZRI

      Attach the 3 claws to install the shift lock control ECU sub-assembly to the lower shift lever assembly.

    2. Connect the shift lock solenoid connector.

  3. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Install the No. 2 indoor electrical key antenna assembly to the lower shift lever assembly with the screw.

      Torque:
      1.9 N*m  { 19 kgf*cm, 16 in.*lbf }