Table 1. *1 Component without harness connected: (Transmission Control Switch)
-
Measure the resistance according to the value(s) in the table below.
| Standard Resistance |
| Tester Connection |
Condition |
Specified Condition |
| 3 (IG) - 7 (S) |
Shift lever in S, "+" or "-" |
Below 1 Ω |
| 2 (SFTU) - 5 (E) |
Shift lever held in "+" (Up-shift) |
| 1 (SFTD) - 5 (E) |
Shift lever held in "-" (Down-shift) |
| 3 (IG) - 7 (S) |
Shift lever not in S, "+" or "-" |
10 kΩ or higher |
| 2 (SFTU) - 5 (E) |
Shift lever in S |
| 1 (SFTD) - 5 (E) |
|
If the result is not as specified, replace the transmission floor shift assembly.