SHIFT LEVER(w/ Entry and Start System) DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Remove the screw and No. 2 indoor electrical key antenna assembly from the lower shift lever assembly.

  2. REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY


    1. B001ZRI

      Disconnect the shift lock solenoid connector.

    2. Detach the 3 claws and remove the shift lock control ECU sub-assembly from the lower shift lever assembly.

  3. REMOVE POSITION INDICATOR LENS

    Tech Tips

    Only perform this procedure when replacement of the position indicator lens is necessary.


    1. Remove the position indicator housing assembly Click here.

    2. B001YUK

      Detach the 2 claws and remove the shift lock release button and shift lock release spring from the position indicator housing assembly.

    3. B001XMO

      Remove the position indicator slide cover with No. 2 position indicator slide cover.

    4. B001ZU4

      Detach the claw and remove the No. 2 position indicator slide cover from the position indicator slide cover.

    5. B001ZLI

      Detach the 2 claws and remove the position indicator plate sub-assembly from the position indicator lens.

    6. B001XAH

      Detach the 4 claws and remove the position indicator lens from the position indicator housing assembly.