PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE FRONT EXHAUST PIPE ASSEMBLY (w/ DPF)

    Click here

  2. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY


    1. Move the shift lever to N.

    2. B001Y6Y

      Remove the clip and pin, and disconnect the shifting rod from the transmission control shaft lever RH.

  3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Disconnect the switch connector.

    2. B001XBW

      Remove the nut, spring washer and transmission control shaft lever RH.

    3. Remove the collar and transmission control rod bush from the transmission control shaft lever RH.

    4. A01X7HS

      Using a screwdriver, bend the tabs of the lock washer.

    5. A01WZZO

      Remove the lock nut and lock washer.

    6. A01X4I8

      Remove the bolt and switch.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.