VALVE BODY ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL CHECK BALL BODY


    1. A01X2PDE27
      Text in Illustration
      *1 Check Ball Body
      *2 Spring

      Install the spring and check ball body.

  2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY


    1. B001VOXE04
      Text in Illustration
      *1 Pin

      Insert the pin of the manual valve into the hole of the manual valve lever.

    2. B00203OE05

      Install the 19 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

      Tech Tips

      Each bolt length is indicated below.

      36 mm (1.42 in.) for bolt A

      25 mm (0.984 in.) for bolt B

      45 mm (1.77 in.) for bolt C

      50 mm (1.97 in.) for bolt D

    3. Install the detent spring and detent spring cover with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  3. CONNECT TRANSMISSION WIRE

    Click here

  4. RESET MEMORY

    for 1UR-FE: Click here

    for 1VD-FTV: Click here