VALVE BODY ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

    A01X2PDE27
    Text in Illustration
    *1 Check Ball Body
    *2 Spring

    1. Install the spring and check ball body.

    2. B001VOXE04
      Text in Illustration
      *1 Pin

      Insert the pin of the manual valve into the hole of the manual valve lever.

    3. B00203OE05

      Install the 19 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

      Tech Tips

      Each bolt length is indicated below.

      36 mm (1.42 in.) for bolt A

      25 mm (0.984 in.) for bolt B

      45 mm (1.77 in.) for bolt C

      50 mm (1.97 in.) for bolt D

    4. Install the detent spring and detent spring cover with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  2. CONNECT TRANSMISSION WIRE

    Click here

  3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

    Click here

  4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

    Click here

  5. RESET MEMORY

    for 1UR-FE: Click here

    for 3UR-FE: Click here

    for 1VD-FTV: Click here

  6. ADD AUTOMATIC TRANSMISSION FLUID

    Click here

  7. INSTALL OIL PAN PROTECTOR ASSEMBLY

    Click here

  8. INSTALL NO. 2 ENGINE UNDER COVER

    Click here