TRANSMISSION WIRE INSPECTION

PROCEDURE


  1. INSPECT TRANSMISSION WIRE (ATF TEMPERATURE SENSOR)

    A01WZGUE77
    *1 Component without harness connected: (No. 1 Transmission Wire)

    1. Measure the resistance according to the value(s) in the table below.

      Tech Tips

      If the resistance is out of the specified range at any of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.

      Standard Resistance
      Tester Connection ATF Temperature Specified Condition
      1 (OT-) - 9 (OT+) 10°C (50°F) 5 to 8 kΩ
      1 (OT-) - 9 (OT+) 25°C (77°F) 2.5 to 4.5 kΩ
      1 (OT-) - 9 (OT+) 110°C (230°F) 0.22 to 0.28 kΩ
      2 (OT2-) - 10 (OT2+) 10°C (50°F) 5 to 8 kΩ
      2 (OT2-) - 10 (OT2+) 25°C (77°F) 2.5 to 4.5 kΩ
      2 (OT2-) - 10 (OT2+) 110°C (230°F) 0.22 to 0.28 kΩ

      If the result is not as specified, replace the transmission wire.