OIL COOLER INSTALLATION

PROCEDURE


  1. INSTALL OIL COOLER ASSEMBLY

    B001ZSQE01
    Text in Illustration
    *a Lower Side
    *b Outward

    1. Connect the oil cooler inlet hose and outlet hose.

    2. Install the rear transmission oil cooler air duct with the 4 bolts, and then install the air cooled oil cooler tube to the transmission oil cooler air duct with the bolt.

      Torque:
      4.9 N*m  { 50 kgf*cm, 43 in.*lbf }
    3. B001VY6E02
      Text in Illustration
      *1 Claw

      Temporarily put the oil cooler on the radiator support.

      Note

      Securely attach the 2 claws of the oil cooler into the holes of the radiator support.

    4. Install the 4 bolts in the sequence shown in the illustration.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  2. INSTALL TRANSMISSION OIL COOLER AIR DUCT


    1. Install the oil cooler air duct with the 4 bolts.

      Torque:
      4.9 N*m  { 50 kgf*cm, 43 in.*lbf }

  3. INSTALL OIL COOLER TUBE

    B002059E01
    Text in Illustration
    *A for 1VD-FTV *B for 1UR-FE, 3UR-FE

    1. Temporarily install the oil cooler tube to the fan shroud with bolt A. Install bolt B and tighten it to the specified torque. Then tighten bolt A to the specified torque.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

  4. INSTALL OIL COOLER TUBE (w/o Air Cooled Transmission Oil Cooler)

    B001XHUE02

    1. Temporarily install the oil cooler tube to the fan shroud with bolt A. Install bolt B and tighten it to the specified torque. Then tighten bolt A to the specified torque.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

  5. CONNECT INLET NO. 4 OIL COOLER HOSE

    B001X1BE02
    Text in Illustration
    *1 Paint Mark

    1. Connect the inlet oil cooler hose as shown in the illustration.

      Note

      Make sure the pinching portion of each clip is facing the direction shown in the illustration and the paint marks are aligned as shown in the illustration.

  6. CONNECT INLET NO. 2 OIL COOLER HOSE AND INLET NO. 3 OIL COOLER HOSE

    B001ZHGE01
    Text in Illustration
    *A for 1VD-FTV *B for 1UR-FE, 3UR-FE

    1. Connect the 2 inlet oil cooler hoses as shown in the illustration.

      Note

      Make sure the pinching portion of each clip is facing the direction shown in the illustration.

  7. CONNECT INLET NO. 2 OIL COOLER HOSE AND INLET NO. 3 OIL COOLER HOSE (w/o Air Cooled Transmission Oil Cooler)

    A01X0R7

    1. Connect the 2 inlet oil cooler hoses as shown in the illustration.

      Note

      Make sure the pinching portion of each clip is facing the direction shown in the illustration.

  8. CONNECT INLET NO. 1 OIL COOLER HOSE AND OUTLET NO. 1 OIL COOLER HOSE

    B001Z9YE02
    Text in Illustration
    *A for 1VD-FTV *B for 1UR-FE, 3UR-FE
    *1 Paint Mark - -

    1. Connect the 2 oil cooler hoses as shown in the illustration.

      Note

      Make sure the pinching portion of each clip is facing the direction shown in the illustration and the paint marks are aligned as shown in the illustration.

    2. Attach the hose to the flexible hose clamp and close the clamp as shown in the illustration.

  9. CONNECT INLET NO. 1 OIL COOLER HOSE AND OUTLET NO. 1 OIL COOLER HOSE (w/o Air Cooled Transmission Oil Cooler)

    B00206KE03
    Text in Illustration
    *1 Paint Mark

    1. Connect the 2 oil cooler hoses as shown in the illustration.

      Note

      Make sure the pinching portion of each clip is facing the direction shown in the illustration and the paint marks are aligned as shown in the illustration.

  10. CONNECT TRANSMISSION OIL COOLER HOSE

    B001YAPE01
    Text in Illustration
    *a RH Side
    *b Paint Mark

    1. Connect the 2 transmission oil cooler hoses as shown in the illustration.

      Note


      • Make sure the pinching portion of each clip is facing the direction shown in the illustration.

      • Make sure the paint mark of each hose is facing outward.

  11. ADD AUTOMATIC TRANSMISSION FLUID


    1. Add automatic transmission fluid Click here.

  12. INSTALL FRONT BUMPER COVER (w/ Air Cooled Transmission Oil Cooler)


    1. for Standard:

      Click here

    2. w/ Winch:

      Click here

  13. INSTALL NO. 2 ENGINE UNDER COVER

    Click here

  14. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  15. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  16. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  17. INSTALL FRONT FENDER APRON TRIM PACKING C

    Click here

  18. INSTALL FRONT FENDER APRON TRIM PACKING A

    Click here