PARK / NEUTRAL POSITION SWITCH ADJUSTMENT

PROCEDURE


  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    B001X5UE02
    *1 Neutral Basic Line
    *2 Groove

    1. Loosen the bolt of the park/neutral position switch and move the shift lever to N.

    2. Align the groove with the neutral basic line.

    3. Hold the switch in the position described above and tighten the bolt.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

    4. After the adjustment, perform the on-vehicle inspection Click here.