PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE


  1. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

    B001Y6Y

    1. Remove the clip and pin, and disconnect the shifting rod from the transmission control shaft lever RH.

  2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Disconnect the switch connector.

    2. A01WZIV

      Remove the nut, spring washer and transmission control shaft lever RH.

    3. Remove the collar and transmission control rod bush from the transmission control shaft lever RH.

    4. A01X5JC

      Using a screwdriver, bend the tabs of the lock washer.

    5. A01WZEE

      Remove the lock nut and lock washer.

    6. A01X9CB

      Remove the bolt and switch.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.