VALVE BODY ASSEMBLY INSTALLATION

PROCEDURE

1. Table 1. *1 Check Ball Body *2 Spring
   Click here

   INSTALL TRANSMISSION VALVE BODY ASSEMBLY

   
   

   1. Install the spring and check ball body.

   2. 

      Table 2.

      *1

      Pin

      Insert the pin of the manual valve into the hole of the manual valve lever.

   3. 

      Install the transmission valve body with the 19 bolts.

      11 N*m

      112 kgf*cm

      8 ft.*lbf

      Tip:

      Each bolt length is indicated below.

      36 mm (1.42 in.) for bolt A

      25 mm (0.984 in.) for bolt B

   4. Install the detent spring and detent spring cover with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

2. Click here

   CONNECT TRANSMISSION WIRE

   Click here

3. Click here

   INSTALL VALVE BODY OIL STRAINER ASSEMBLY

   Click here

4. Click here

   INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

   Click here

5. Click here

   RESET MEMORY

   (Click here)

6. Click here

   ADD AUTOMATIC TRANSMISSION FLUID

   
   

   1. Add automatic transmission fluid (Click here).