CLUTCH SWITCH(for RHD) INSPECTION

PROCEDURE


  1. INSPECT CLUTCH SWITCH ASSEMBLY

    A01X3CUE06
    *1 6.5 to 7.5 mm (0.256 to 0.295 in.)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed (On) Below 1 Ω
      1 - 2 Not pushed (Off) 10 kΩ or higher

      If the result is not as specified, replace the clutch switch assembly.