CLUTCH SWITCH(for LHD) INSTALLATION

PROCEDURE


  1. INSTALL CLUTCH SWITCH ASSEMBLY


    1. A01X3TV

      Install the clutch switch assembly and tighten the adjusting nut.

      Torque:
      16 N*m  { 163 kgf*cm, 12 ft.*lbf }
    2. A01X2T8E01
      *1 Adjusting Nut
      *2 Cushion

      Adjust the clutch switch so that the threaded portion of the clutch switch lightly contacts the cushion. Then tighten the adjusting nut and check the contact of the cushion and switch.

      Torque:
      16 N*m  { 163 kgf*cm, 12 ft.*lbf }

      Note

      After adjusting the pedal free play, perform the clutch switch assembly adjustment Click here.

  2. INSTALL CLUTCH PEDAL SUPPORT SUB-ASSEMBLY WITH CLUTCH MASTER CYLINDER


    1. Install the clutch pedal support sub-assembly with clutch master cylinder Click here.