MILLIMETER WAVE RADAR SENSOR INSTALLATION

PROCEDURE

1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY

   
   

   1. Temporarily install the millimeter wave radar sensor assembly with the 3 bolts.

   2. 

      Tighten the 3 bolts in alphabetical order.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   3. Connect the sensor connector.

      Note

      Do not use a sensor which has been dropped or subjected to any strong shocks.

2. INSTALL RADIATOR GRILLE ASSEMBLY

   Click here

3. INSTALL UPPER RADIATOR SUPPORT SEAL

   Click here

4. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY

   Click here

5. PERFORM DRIVE TEST

   Click here