MILLIMETER WAVE RADAR SENSOR REASSEMBLY

CAUTION / NOTICE / HINT

Note


  • Do not damage the millimeter wave radar sensor assembly.

  • If the No. 1 millimeter wave radar sensor bracket has been removed/installed, be sure to perform adjustment.

PROCEDURE


  1. INSTALL NO. 1 MILLIMETER WAVE RADAR SENSOR BRACKET


    1. A01X6ZTE05
      Text in Illustration
      *a Screw A
      *b Screw B

      Install a new No. 1 millimeter wave radar sensor bracket with the 2 screws.

      Tech Tips

      Tighten the screws in the order indicated in the illustration.

      Torque:
      for Screw A
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }
      for Screw B
      0.8 N*m  { 8 kgf*cm, 7 in.*lbf }