DRIVING SUPPORT ECU INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RHD and LHD.

  • The following procedure is for the LHD.

PROCEDURE


  1. INSTALL DRIVING SUPPORT ECU ASSEMBLY

    Note

    Do not reuse the driving support ECU assembly if it has been dropped or subjected to a severe impact.


    1. Connect the connector.

    2. Install the driving support ECU assembly with the bolt.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  2. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

    Click here