LANE DEPARTURE ALERT SYSTEM PROBLEM SYMPTOMS TABLE

Tech Tips


  • If any of the following symptoms exist despite the normal system code being output when checking for CAN communication and lane departure alert system DTCs, check the suspected areas in the order they are listed.

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Lane Departure Alert System
Symptom Suspected Area See page
Lane departure alert system does not operate Forward recognition camera power source circuit

Click here

Lane departure alert main switch circuit

Click here

Driving support ECU assembly

Click here

Forward recognition camera

Click here

Lane departure alert indicator abnormal (Does not turn on) Lane departure alert indicator circuit

Click here

Lane departure alert main switch circuit

Click here

Combination meter assembly

Click here

Driving support ECU assembly

Click here

Forward recognition camera

Click here

Lane departure alert indicator abnormal (Remains on) Lane departure alert indicator circuit

Click here

Lane departure alert main switch circuit

Click here

Combination meter assembly

Click here

Driving support ECU assembly

Click here

Forward recognition camera

Click here

Lane departure alert system is not canceled even when turn signal light switch is operated

Data List/Active Test

(Check turn signal switch signal)

Click here

Turn signal light switch circuit

Click here

Forward recognition camera

Click here

Increase in cases that driver can see line markers but system cannot detect lane markers Windshield glass is dirty -
Forward recognition camera is dirty -
Headlight assemblies are dirty or worn -
Non-standard suspension is installed -
Non-standard tires are installed -
Non-Toyota genuine windshield glass is installed -
There is a foreign object or foreign matter between the windshield glass and forward recognition camera -
A sticker or similar item is attached to the area in front of the forward recognition camera -
Adjust forward recognition camera

Click here

Forward recognition camera

Click here

Lane departure alert system is operating, but no operation condition is displayed on multi-information display in combination meter assembly

Data List/Active Test

(Check the item LDA Control)

Click here

Combination meter assembly

Click here

Forward recognition camera

Click here

Buzzer does not sound even when lane markers are lost while lane departure warning function is operating Combination meter assembly

Click here

Forward recognition camera

Click here