ROAD SIGN ASSIST SYSTEM SYSTEM DESCRIPTION


  1. ROAD SIGN ASSIST SYSTEM DESCRIPTION


    1. The road sign assist system uses the forward recognition camera to recognize traffic signs and provides information to the driver on the multi-information display.

  2. ROAD SIGN ASSIST SYSTEM CONTROL


    1. Control Pattern 1:

      A01XC4PE02
      Text in Illustration
      *a Multi-information Display *b Traffic Sign
      *c Distance - -

      After a sign is recognized by the forward recognition camera and the vehicle passes by, the sign is displayed on the multi-information display. If no new signs are recognized while a sign is displayed, the system assesses the reliability of the currently displayed sign and clears the display.

    2. Control Pattern 2:

      A01X3UWE02
      Text in Illustration
      *a Engine Switch off *b Engine switch on (IG)
      *c Multi-information Display - -

      If a speed limit sign was displayed when the previous trip ended, when the engine switch is turned on (IG), the same sign is displayed again.

    3. Control Pattern 3:

      A01X2BME02
      Text in Illustration
      *a Multi-information Display *b Traffic Sign

      While a sign is displayed, if the currently traveled road changes due to a left or right turn, etc., the displayed sign is cleared.

  3. DISPLAY SPECIFICATIONS


    1. Road signs recognized by the forward recognition camera are divided into the following categories and displayed on the multi-information display.

      Supported Road Sign Multi-information Display Notification Function Operation
      Category Type Multi-information Display Buzzer
      Speed Limit Maximum speed limit/End of speed limit A01XB5F A01X142

      Excess speed notification

      (Display inverts)

      		 Sounds*1
      No Overtaking No overtaking/End of no overtaking A01X086 A01X6XQ

      No overtaking notification

      (Blinks)

      		 Sounds*1
      End of prohibition A01X5N9 - -
      Supplemental Signs (display simultaneously with speed limit) Wet A01X0G0 - -
      Rain A01X9J9 - -
      Ice A01X1QS - -
      Time restriction A01X689 - -
      Ramp way*2 A01X34D - -
      Blank*3 A01X37C - -

      • *1: Through the customization settings, the buzzer can be made to sound during warnings. However, a buzzer warning will not occur when exceeding the speed limit with a supplemental sign present.

      • *2: This sign is not displayed when performing a lane change without operating the turn signal.

      • *3: The display is blank when the system is unable to recognize a meaning of supplemental sign.

    2. The display format for signs displayed on the multi-information display can be changed using the steering pad switch assembly.