GENERATOR INSTALLATION

Click here Click here

PROCEDURE

1. Click here

   INSTALL GENERATOR ASSEMBLY

   
   

   1. Install the stud bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

   2. Install the generator with the 3 bolts and nut.

      43 N*m

      438 kgf*cm

      32 ft.*lbf

   3. Connect the harness bracket to the generator with the bolt.

      31 N*m

      316 kgf*cm

      23 ft.*lbf

   4. Connect the generator wire with the nut.

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

   5. Close the terminal cap.

   6. Connect the generator connector.

2. Click here

   CONNECT OIL COOLER PIPE ASSEMBLY

   Click here

3. Click here

   CONNECT VANE PUMP ASSEMBLY

   Click here

4. Click here

   INSTALL AIR CLEANER ASSEMBLY

   Click here

5. Click here

   INSTALL AIR CLEANER HOSE ASSEMBLY

   Click here

6. Click here

   INSTALL FRONT FENDER APRON SEAL FRONT RH

   Click here

7. Click here

   INSTALL FAN AND GENERATOR V BELT

   Click here

8. Click here

   INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

9. Click here

   INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

   Click here

10. Click here

    INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

11. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

12. Click here

    INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here