GENERATOR REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  5. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  6. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  7. REMOVE FAN AND GENERATOR V BELT

    Click here

  8. REMOVE FRONT FENDER APRON SEAL FRONT RH

    Click here

  9. REMOVE AIR CLEANER HOSE ASSEMBLY

    Click here

  10. REMOVE AIR CLEANER ASSEMBLY

    Click here

  11. DISCONNECT VANE PUMP ASSEMBLY

    Click here

  12. DISCONNECT OIL COOLER PIPE ASSEMBLY

    Click here

  13. REMOVE GENERATOR ASSEMBLY


    1. A01X6JL

      Disconnect the generator connector.

    2. Open the terminal cap.

    3. Remove the nut and disconnect the generator wire.

    4. Remove the bolt and disconnect the wire harness bracket from the generator.

    5. A01X6FW

      Remove the 3 bolts, nut and generator.

    6. Remove the stud bolt.