LIN COMMUNICATION SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

PROCEDURE

1. VEHICLE BROUGHT TO WORKSHOP

   Result
   Result NEXT

   
   

   NEXT

2. INSPECT BATTERY VOLTAGE

   Standard Voltage
   11 to 14 V

   If the voltage is below 11 V, recharge or replace the battery before proceeding.

   Result
   Result NEXT

   
   

   NEXT

3. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

   
   

   1. Using the GTS, inspect the CAN communication function to ensure there are no malfunctions in the communication system.

      Click here

      Result
      Result Proceed to No DTCs output A DTCs output (for LHD with Central Gateway ECU) B DTCs output (for LHD without Central Gateway ECU) C DTCs output (for RHD with Central Gateway ECU) D DTCs output (for RHD without Central Gateway ECU) E

   
   

   B

   Go to CAN COMMUNICATION SYSTEM Click here

   C

   Go to CAN COMMUNICATION SYSTEM Click here

   D

   Go to CAN COMMUNICATION SYSTEM Click here

   E

   Go to CAN COMMUNICATION SYSTEM Click here

   A

4. INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*

   
   

   1. Using the GTS, check for LIN communication system DTCs.

      Result
      Result Proceed to No DTCs output A DTCs output B

   
   

   B

   Go to DIAGNOSTIC TROUBLE CODE CHART Click here

   A

5. PROBLEM SYMPTOMS TABLE

   
   

   1. Refer to the Problem Symptoms Table.

      Click here

      Result
      Result Proceed to Fault is not listed in problem symptoms table A Fault is listed in problem symptoms table B

   
   

   B

   GO TO STEP 7 Click here

   A

6. OVERALL ANALYSIS AND TROUBLESHOOTING*

   
   

   1. Data List / Active Test

      Click here

   2. Terminals of ECU

      Click here

      Result
      Proceed to NEXT

   
   

   NEXT

7. ADJUST, REPAIR OR REPLACE

   Result
   Proceed to NEXT

   
   

   NEXT

   END