MULTI-TERRAIN MONITOR SWITCH INSPECTION

PROCEDURE


  1. INSPECT MAIN SWITCH ASSEMBLY


    1. A01X052E13
      Text in Illustration
      *a

      Component without harness connected

      (Multi-terrain Monitor Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (IG) - 7 (ECU) Main switch assembly on Below 1 Ω
      1 (IG) - 7 (ECU) Main switch assembly off 10 kΩ or higher

    2. Check that the switch illuminates.


      1. Apply battery voltage to the back sonar or clearance sonar switch assembly and check that the switch illuminates.

        OK
        Tester Connection Specified Condition

        Battery positive (+) → Terminal 3 (ILL+)

        Battery negative (-) → Terminal 5 (ILL-)

        		 Illuminates