REAR CROSS TRAFFIC ALERT BUZZER REMOVAL

PROCEDURE

1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

   Click here

2. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (w/ Rear No. 2 Seat)

   Click here

3. REMOVE REAR STEP COVER

   Click here

4. REMOVE REAR DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedures described for the LH side Click here.

5. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

   Click here

6. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat)

   Tech Tips

   Use the same procedures described for the LH side Click here.

7. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

   Tech Tips

   Use the same procedures described for the LH side Click here.

8. REMOVE REAR UPPER PILLAR GARNISH RH

   Tech Tips

   Use the same procedures described for the LH side Click here.

9. REMOVE BLIND SPOT MONITOR BUZZER

   
   

   1. 

      Using a clip remover, detach the clamp and remove the blind spot monitor buzzer.

   2. Disconnect the connector.