Click here

BLIND SPOT MONITOR SENSOR REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

Note:

  • Avoid any impact to the blind spot monitor sensor.

  • Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.

Click here

PROCEDURE


  1. Click here

    REMOVE REAR BUMPER COVER


    1. for Standard:

      (Click here)

    2. w/ Towing Hitch:

      (Click here)

    3. w/ Pintle Hook:

      (Click here)

  2. Click here

    REMOVE BLIND SPOT MONITOR SENSOR LH


    1. A01X5FOE03

      Disconnect the connector.

      Table 1. Text in Illustration
      *a Nut
      *b Connector

    2. Remove the 3 nuts and blind spot monitor sensor LH.

  3. Click here

    REMOVE BLIND SPOT MONITOR SENSOR RH

    Tip:

    Use the same procedure described for the LH side.

  4. Click here

    REMOVE BLIND SPOT MONITOR BRACKET LH


    1. A01X09F

      Remove the 3 nuts and blind spot monitor bracket LH.

  5. Click here

    REMOVE BLIND SPOT MONITOR BRACKET RH

    Tip:

    Use the same procedure described for the LH side.