FRONT AND SIDE MONITOR MAIN SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL MAIN SWITCH ASSEMBLY


    1. Attach the 2 claws to install the main switch assembly.

  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. w/o Multi-information Display:

      Connect the connector.

    2. w/ Multi-information Display:

      Connect the 2 connectors.

    3. A01X74N

      Attach the 9 claws to install the finish panel.

    4. A01WZZ1

      Attach the 4 claws.

  3. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  4. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  5. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  7. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note


    • Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.