ULTRASONIC SENSOR(for Rear) REMOVAL

PROCEDURE


  1. REMOVE REAR BUMPER COVER


    1. for Standard:

      Click here.

    2. w/ Towing Hitch:

      Click here.

    3. w/ Pintle Hook:

      Click here.

  2. REMOVE NO. 2 FRAME WIRE


    1. for Standard:

      Click here.

    2. w/ Towing Hitch:

      Click here.

    3. w/ Pintle Hook:

      Click here.

  3. REMOVE NO. 1 ULTRASONIC SENSOR


    1. A01WZ78

      Detach the 2 claws and remove the No. 1 ultrasonic sensor.

      Tech Tips


      • Use the same procedure for all No. 1 ultrasonic sensors.

      • The illustration shows the No. 1 ultrasonic sensor for the RH corner and back sensor LH and RH. The installation position of the No. 1 ultrasonic sensor for the LH corner is on the opposite side.

  4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER


    1. A01X4BO

      Detach the 2 claws and remove the No. 1 ultrasonic sensor retainer from the rear bumper cover.

      Tech Tips


      • Use the same procedure to remove the No. 1 ultrasonic sensor retainer on the other side.

      • The illustration shows the No. 1 ultrasonic sensor retainer for the RH corner. The vertical orientation of the No. 1 ultrasonic sensor retainers for the LH corner is opposite that of the image shown in the illustration.

  5. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER


    1. A01X7OV

      Detach the 2 claws and remove the No. 2 ultrasonic sensor retainer from the rear bumper cover.

      Tech Tips

      Use the same procedure to remove the No. 2 ultrasonic sensor retainer on the other side.