ULTRASONIC SENSOR(for Front) INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER

    Tech Tips

    Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.


    1. A01X46RE02
      Text in Illustration
      *a Protrusion
      *b Keyhole

      Temporarily install the No. 2 ultrasonic sensor retainer to the front bumper.

      Note


      • Do not damage the bumper with the protrusion when installing the retainer.

      • Securely install the No. 2 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.

    2. A01X7OV

      Attach the 2 claws to install the No. 2 ultra sonic sensor retainer.

  2. INSTALL NO. 1 ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure to install the No. 1 ultrasonic sensor on the other side.


    1. Attach the 2 claws to install the ultrasonic sensor.

      Note

      Push the No. 2 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the No. 1 ultrasonic sensor.

  3. INSTALL ULTRASONIC SENSOR CLIP


    1. Attach the 4 claws to install the ultrasonic sensor clip.

      Note

      Hold the No. 1 ultrasonic sensor in place so that the No. 2 ultrasonic sensor retainer does not come out when installing the ultrasonic sensor clip.

  4. INSTALL NO. 4 ENGINE ROOM WIRE

    Click here

  5. INSTALL FRONT BUMPER COVER

    Click here