ULTRASONIC SENSOR(for Front) REMOVAL

PROCEDURE


  1. REMOVE FRONT BUMPER COVER

    Click here

  2. REMOVE NO. 4 ENGINE ROOM WIRE

    Click here

  3. REMOVE ULTRASONIC SENSOR CLIP


    1. A01X359

      Detach the 4 claws and remove the ultrasonic sensor clip.

  4. REMOVE NO. 1 ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure to remove the No. 1 ultrasonic sensor on the other side.


    1. A01X38B

      While pushing down on the lever with a finger to release the one claw, detach the claw on the other side to remove the No. 1 ultrasonic sensor.

      Tech Tips

      The type of claw on the top and bottom of the sensor are different. Observe the claws carefully before removing the No. 1 ultrasonic sensor.

  5. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER

    Tech Tips

    Use the same procedure to remove the No. 2 ultrasonic sensor retainer on the other side.


    1. A01X7OV

      Detach the 2 claws and remove the No. 2 ultrasonic sensor retainer from the front bumper cover.