CLEARANCE WARNING ECU REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  2. REMOVE CLEARANCE WARNING ECU


    1. w/o Multi-terrain Monitor:


      1. A01X50O

        Remove the 2 screws and clearance warning ECU.

      2. Disconnect the connector.

    2. w/ Multi-terrain Monitor:


      1. A01X0MB

        Remove the 2 screws.

      2. A01X3GB

        Using a clip remover, detach the claw, guide and remove the clearance warning ECU.

      3. Disconnect the connector.