CLEARANCE SONAR MAIN SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  2. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  3. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  5. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  7. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  8. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

  9. REMOVE BACK SONAR OR CLEARANCE SONAR SWITCH ASSEMBLY


    1. A01X2N5

      Detach the 2 claws and remove the back sonar or clearance sonar switch assembly.