MULTI-TERRAIN MONITOR SYSTEM, Diagnostic DTC:C1697

DTC Code DTC Name
C1697 Camera Position Adjustment Incomplete

DESCRIPTION

This DTC is stored when the parking assist ECU judges that the camera initial setting has not been memorized (camera view adjustment is incomplete).

DTC Code DTC Detection Condition Trouble Area
C1697 Camera initial setting has not been memorized

  • Camera view adjustment

  • Parking assist ECU

CAUTION / NOTICE / HINT

Note


  • When "!" mark is displayed on the multi-display after disconnecting the cable from the negative (-) battery terminal, correct the steering angle neutral point Click here.

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the multi-terrain monitor system may be needed Click here.

PROCEDURE


  1. ADJUST SETTINGS (CAMERA VIEW ADJUSTMENT)


    1. Perform the following procedure depending on the memory conditions to register the vehicle information to the parking assist ECU.


      1. Refer to camera view adjustment Click here.


    NEXT

  2. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      OK
      DTC C1697 is not output.

      Tech Tips


      • If DTC C1697 is output, perform the camera view adjustment again.

      • If DTC C1697 is still output after performing the camera view adjustment 3 times, replace the parking assist ECU.


    OK

    END (CAMERA VIEW ADJUSTMENT IS DEFECTIVE)

    NG

    REPLACE PARKING ASSIST ECU Click here