REAR VIEW MONITOR SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips

Use the following procedures to troubleshoot the rear view monitor system.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT
  2. CUSTOMER PROBLEM ANALYSIS

    Result
    Proceed to
    NEXT

    NEXT
  3. INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, replace or recharge the battery before proceeding.

    Result
    Proceed to
    NEXT

    NEXT
  4. CHECK DTC OF NAVIGATION SYSTEM


    1. Refer to the DTC Check / Clear procedures of the navigation system.

      Click here

      Result
      Result Proceed to
      DTC is not output A
      DTC is output B

    B
    A
  5. PROBLEM SYMPTOM CONFIRMATION

    Result
    Result Proceed to
    Symptom does not occur A
    Symptom occurs B

    B
    A
  6. SYMPTOM SIMULATION

    Result
    Proceed to
    NEXT

    NEXT
  7. CHECK IF SAME SYMPTOM APPEARS IN OTHER SYSTEM

    Result
    Result Proceed to
    Symptom does not appear A
    Symptom appears (Audio and Visual System [w/ Navigation System]) B
    Symptom appears (Navigation System) C
    Symptom appears (Rear Seat Entertainment System) D

    B
    C
    D
    A
  8. PROBLEM SYMPTOMS TABLE


    1. Refer to the Problem Symptoms Table.

      Click here

      Result
      Result Proceed to
      Fault is not listed in problem symptoms table A
      Fault is listed in problem symptoms table B

    B
    A
  9. BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW


    1. Terminals of ECU.

      Click here

      Result
      Proceed to
      NEXT

    NEXT
  10. ADJUST, REPAIR OR REPLACE

    Result
    Proceed to
    NEXT

    NEXT
  11. CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    NEXT