TELEPHONE ANTENNA REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE ROOF HEADLINING ASSEMBLY


    1. Remove the roof headlining Click here.

  4. REMOVE NO. 5 REAR ROOF AIR DUCT

    Click here

  5. REMOVE NO. 4 REAR ROOF AIR DUCT

    Click here

  6. REMOVE NO. 3 REAR ROOF AIR DUCT

    Click here

  7. REMOVE TELEPHONE ANTENNA ASSEMBLY


    1. B001YBC

      Disconnect the connector.

    2. B001ZKA

      Remove the bolt and then remove the washer and holder.

    3. B001X1Y

      Remove the telephone antenna assembly of the vehicle outside.

    4. B001ZOL

      Detach the claws and guides and remove the telephone antenna assembly as indicated by the arrows in the order shown in the illustration.

    5. When reusing the telephone antenna assembly:


      1. B001YBA

        Remove the seal.