FUEL PRESSURE REGULATOR REMOVAL

PROCEDURE

1. Click here

   DISCHARGE FUEL SYSTEM PRESSURE

   Click here

2. Click here

   PRECAUTION

   Note:

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

3. Click here

   DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

4. Click here

   REMOVE V-BANK COVER SUB-ASSEMBLY

   Click here

5. Click here

   REMOVE AIR CLEANER HOSE ASSEMBLY

   Click here

6. Click here

   REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

   
   
   1. 

      Disconnect the No. 2 fuel tube from the pressure regulator (Click here).

      CAUTION:

      Put a cloth or equivalent under the pressure regulator.

   2. 

      Disconnect the vacuum sensing hose from the pressure regulator.

   3. 

      Remove the 2 bolts, and pull out the pressure regulator.

   4. Remove the O-ring from the pressure regulator.