FUEL SENDER GAUGE ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A01X4OIE01
      Text in Illustration
      *a

      Component without harness connected

      (Fuel Sender Gauge)
      *b F (Upper)
      *c E (Lower)

      Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Float level is F (upper) 13.5 to 16.5 Ω
      Float level is E (lower) 405.5 to 414.5 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.