FUEL PRESSURE REGULATOR INSTALLATION

PROCEDURE

1. Click here

   INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

   
   

   1. Apply a light coat of gasoline or spindle oil to a new O-ring and install the O-ring to the pressure regulator.

      Note:
      

      • Make sure that there are no scratches or foreign matter in or around the insertion hole of the delivery pipe.

      • When inserting the pressure regulator, be careful not to damage the O-ring.

   2. 

      While turning the pressure regulator left and right, install it to the delivery pipe.

   3. Install the 2 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

   4. Install the No. 1 air hose to the pressure regulator.

   5. Connect the No. 2 fuel tube to the pressure regulator (Click here).

2. Click here

   INSTALL AIR CLEANER CAP AND HOSE

   Click here

3. Click here

   CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

4. Click here

   INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here

5. Click here

   INSPECT FOR FUEL LEAK

   Click here