FUEL PUMP(for Double Tank Type) REASSEMBLY

CAUTION / NOTICE / HINT

Note

Do not disconnect the hoses indicated in the illustration.

A01X8O8

PROCEDURE


  1. INSTALL NO. 1 FUEL SUCTION SUPPORT


    1. Attach the 2 claws to the claw holes to install the No. 1 fuel suction support.

  2. INSTALL FUEL MAIN VALVE ASSEMBLY


    1. Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel main valve assembly.

    2. A01X5OZE02
      Text in Illustration
      *1 O-Ring
      *a Fuel Filter Case

      Install the fuel main valve assembly to the fuel filter case.

      Note

      Make sure the O-rings are not cut or pinched during the installation.

  3. INSTALL FUEL PUMP


    1. Connect the fuel pump wire harness connector to the fuel pump.

    2. A01X8A4E05
      Text in Illustration
      *1 O-Ring
      *2 Spacer

      Apply a light coat of gasoline to a new O-ring. Then install the spacer and O-ring to the fuel pump.

    3. Attach the 5 claws to the claw holes and install the fuel pump to the fuel filter case.

  4. INSTALL NO. 1 FUEL SUB-TANK

    A01X9RJE07
    Text in Illustration
    *a Fuel Tube

    Note

    Make sure that the fuel tube passes into the section marked by the circle.


    1. Attach the 3 claws to the claw holes and install the No. 1 fuel sub-tank.

    2. Attach the 3 claws to the claw holes.

    3. A01X16WE02
      Text in Illustration
      *a Jet Pump

      Connect the jet pump (labeled B) to the No. 1 fuel sub-tank.


      1. Attach the claw on the end of the tube to the claw hole.

    4. Connect the jet pump (labeled A) to the No. 1 fuel sub-tank.

    5. Connect the fuel pump connector.

  5. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here