REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

    Click here

  3. REMOVE REAR CRANKSHAFT OIL SEAL


    1. A01X8U5E03
      Text in Illustration
      *1 Protective Tape
      *2 Cut Position

      Using a knife, cut off the lip of the rear crankshaft oil seal.

    2. Using a screwdriver, pry out the rear crankshaft oil seal.

      Note

      Do not damage the surface of the rear crankshaft oil seal press fit hole or crankshaft.

      Tech Tips

      Tape the screwdriver tip before use.