CYLINDER HEAD GASKET REMOVAL

PROCEDURE


  1. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY

    Click here

  2. REMOVE CAMSHAFT

    Click here

  3. REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY

    Click here

  4. REMOVE VALVE LASH ADJUSTER ASSEMBLY

    Click here

  5. REMOVE VALVE STEM CAP

    Click here

  6. REMOVE CYLINDER HEAD SUB-ASSEMBLY LH


    1. B001Z03E17

      Uniformly loosen and remove the 2 bolts in the sequence shown in the illustration.

    2. B001YZEE23

      Using a 10 mm bi-hexagon wrench, uniformly loosen the 10 cylinder head bolts in the sequence shown in the illustration. Remove the 10 cylinder head bolts and plate washers.

      Note


      • Be careful not to drop washers into the cylinder head.

      • Head warpage or cracking could result from removing bolts in an incorrect order.

      Tech Tips

      Be sure to arrange the removed parts for each installation position separately.

    3. Remove the cylinder head and gasket.

  7. REMOVE CYLINDER HEAD SUB-ASSEMBLY RH


    1. B001WLOE17

      Uniformly loosen and remove the 2 bolts in the sequence shown in the illustration.

    2. B001Y2VE19

      Using a 10 mm bi-hexagon wrench, uniformly loosen the 10 cylinder head bolts in the sequence shown in the illustration. Remove the 10 cylinder head bolts and plate washers.

      Note


      • Be careful not to drop washers into the cylinder head.

      • Head warpage or cracking could result from removing bolts in an incorrect order.

      Tech Tips

      Be sure to arrange the removed parts for each installation position separately.

    3. Remove the cylinder head and gasket.