REAR CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE

1. INSTALL REAR CRANKSHAFT OIL SEAL

   
   

   1. 

      Apply MP grease to the lip of a new oil seal.

   2. Using SST and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.

      SST

      09223-78010

      Note

      
      

      • Keep the lip free from foreign matter.

      • Do not tap the oil seal at an angle.

2. INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

   Click here

3. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY

   Click here