REAR CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE

1. INSTALL REAR CRANKSHAFT OIL SEAL

   
   

   1. 

      Apply MP grease to the lip of a new oil seal.

   2. Using SST and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.

      SST

      09223-78010

      Note

      
      

      • Keep the lip free from foreign matter.

      • Do not tap the oil seal at an angle.

2. INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transmission)

   Click here

3. INSTALL FLYWHEEL SUB-ASSEMBLY (for Manual Transmission)

   Click here

4. INSTALL CLUTCH DISC ASSEMBLY (for Manual Transmission)

   Click here

5. INSTALL CLUTCH COVER ASSEMBLY (for Manual Transmission)

   Click here

6. INSPECT AND ADJUST CLUTCH COVER ASSEMBLY (for Manual Transmission)

   Click here

7. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)

   Click here

8. INSTALL MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission)

   Click here