REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)

    Click here

  2. REMOVE MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission)

    Click here

  3. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transmission)

    Click here

  4. REMOVE CLUTCH COVER ASSEMBLY (for Manual Transmission)

    Click here

  5. REMOVE CLUTCH DISC ASSEMBLY (for Manual Transmission)

    Click here

  6. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transmission)

    Click here

  7. REMOVE REAR CRANKSHAFT OIL SEAL


    1. B001XLXE07
      Text in Illustration
      *1 Cut Position

      Using a knife, cut off the lip of the oil seal.

    2. Using a screwdriver, pry out the oil seal.

      Note

      Do not damage the surface of the oil seal press fit hole or crankshaft.

      Tech Tips

      Tape the screwdriver tip before use.