FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE

1. INSTALL FRONT CRANKSHAFT OIL SEAL

   
   

   1. 

      Apply MP grease to the lip of a new oil seal.

   2. Using SST and a hammer, tap in the oil seal until its surface is flush with the timing chain cover edge.

      SST

      09226-10010

      Note

      
      

      • Keep the lip free from foreign matter.

      • Do not tap the oil seal at an angle.

2. INSTALL CRANKSHAFT PULLEY

   Click here

3. INSTALL OIL FILTER BRACKET

   Click here

4. CONNECT WATER BY-PASS PIPE SUB-ASSEMBLY

   Click here

5. INSTALL RADIATOR ASSEMBLY

   Click here

6. INSPECT ENGINE OIL LEVEL

   Click here